DeSmuME (NDS WiFi) – Nintendo DS Emulator
DeSmuME 0.9.7 Release
This version brings with it the usual assortment of core, graphics, Wi-Fi support and frontend fixes.
STEP 1 : Download DeSmuME Wi-Fi Pack from here which includes WinPcap and the other things you’ll need.
STEP 2: Install WinPcap. After installation, give WinPcap exceptions in firewall. When installing WinPcap, check the option for starting the driver as windows starts up.
STEP 3: Open DeSmuME (IMPORTANT NOTE: ALL WINDOWS 7/WINDOWS VISTA USERS MUST OPEN DeSmuME AS AN ADMINISTRATOR OR AN ERROR WOULD OCCUR WHEN CONNECTING TO Wi-Fi” Config—>Emulation settings.
Now set the correct paths for the ARM 7 BIOS, ARM 9 bios and Firmware bin.
Make sure the “Use external Bios image” “Use external firmware image” , “Boot from firmware like the NDS” AND “Enabled Advanced bus level timing” are all checked.
STEP4: In DeSmuME, go to Conifg—>Wi-Fi and click on “Infrastructure mode”
STEP 5: Now open your game and go into Nintendo Wi-Fi settings and search for an access point and you should see “SOFT AP” as one, connect and test the connection to check if it worked.
STEP 6: DeSmuME NDS Firmware settings aren’t saved and/or stored automatically, reset the game and/or emulator to store the Firmware settings and then load a Wi-Fi compatible game, go into Nintendo Wi-Fi settings and search for an access point and you should see “SOFT AP” as one, connect and test the connection. This may need to be done each time you open and/or close the emulator.